ServoSaver™ Series
High Pressure Filters
147
Parker Hannifin Corporation
Hydraualic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
Features/Applications for
High Pressure Filters
ServoSaver™ Series
■ Pressures to 4,000 PSI
■ Flows to 30 GPM
■ Microglass 3000 PSI Collapse
Elements in 3 or 15 Micron Absolute
■ Point of use filtration
Model HSS981
ServoSaver™ Filter
ServoSaver filters offer point-of-use filtration for some of the most sensitive hydraulic
valves that there are, servo/proportional valves. Complete protection is provided by
non-bypass filters equipped with high collapse strength elements installed directly at
the valve. The ServoSaver is designed specifically for this use and is not an adaption of
an in-line filter intended for bypass filtration.
1. The Parker ServoSaver filter can be mounted directly under the servo or proportional
pilot valve through use of a subplate or sandwich plate. This eliminates extra
plumbing that causes higher pressure drops and system generated contaminant.
Direct mounting assures that contaminant is filtered out before it can damage the
valve or cause it to malfunction.
2. Microglass elements in 3 and 15 micron absolute ratings provide high efficiency
filtration. Actual dirt holding capacity is excellent and contributes to additional cost
savings. Elements have a minimum collapse rating of 3000 PSI and can be used with
all common hydraulic fluids.
3. TruTell visual or electrical clogging indicators provide advance warning of impending
excessive pressure drop across the filter element so that maintenance can be
performed before system stability is affected.
4. Filter head and bowl are manufactured from high strength steel alloy to withstand
high continuous or intermittent loads.
148
1
2
3
4
Filter Specifications
Material:
Head & Bowl:
Electroless Nickel Plated Steel Alloy
Element Hardware:
Plated, Carbon Steel End Caps and Core
Filter Media:
Glass Micro-Fiber, Epoxy End Cap Adhesive
Fluid Compatabilty:
Suitable for All Conventional Hydraulic Fluids,
Except Phosphate Esters
Pressure Rating:
Maximum Operating:
4000 psi (276 Bar)
Burst Pressure:
19,000 psi (1310 Bar)
Rated Fatigue Pressure:
0-3000-0 PSID (0-210-0 Bar)
10
6
Cycles per NFPA
T2.6.1 R1-1991 (B/99)
Temperature Range:
Operating: -40
o
F to +250
o
F (-40
o
C to 120
o
C)
Weight:
04 Length: 11 lbs. (5.0 Kg)
08 Length: 15.5 lbs. (7.0 Kg)
Parker Hannifin Corporation
Hydraulic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
(A) ‘S’ Port, Visual Indicator and
Sandwich Plate Mounting
(B) ‘M’ Port, Electrical Indicator and
Sandwich Plate Mounting
(C) ‘S’ Port, Dual Electrical Indicator
The ServoSaver filter can also be mounted
to pumps, cylinders or other hydraulic
devices. Special adapter blocks or manifold
porting makes direct mounting simple and
provides for compact installation.
(D) ‘M’ Port, Visual Indicator
(E) ‘S’ Port, Visual and Electrical
Indicator and Subplate Mounting
(F) ‘M’ Port, Visual Indicator and
Sandwich Plate Mounting
149
A B C D E F
Parker Hannifin Corporation
Hydraualic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
25
20
15
10
5
0
HOUSING
S
P, PSID
P, BAR
∆
∆
0 5 10 15 20 25 30
25 50 75 100
FLOW, LITERS/MIN
S PO
RT
M PORT
FLOW U.S. GPM
1.5
1.0
0.5
0
Microglass Media High Performance
Flow/Pressure Drop Curves
Media Nominal Multipass Test Restults To ISO 4572
Code Micron βx>200 (Time Weighted Averages)
Rating
β3 β6 β10 β12 β15 β20 β25
03 1 3 200 >1000 >3000 >5000 ∞ ∞ ∞
99.5 99.9 99.96 99.98
15 10 15 3 12 50 75 >200 >2000 >5000
66.66 91.66 98.0 98.67 99.50 99.95 99.98
Element Beta ratio βx
Element efficiency in percent
Dirt Holding Capacity in Parenthesis (Grams)
Fluid Conditions: Viscosity 140 SSU (30 cSt) and Specific Gravity 0.88 Note: Element ∆P is directly proportional to viscosity.
Find Filter Assembly Pressure Drop
Filter assembly ∆P is equal to the sum of element and housing
pressure drops taken from the appropriate curves and adjusted
for operating viscosity and specific gravity.
Example:
Filter Model: HSS981A-VR-S0803
Flow: 20 GPM (76 L/min)
Viscosity: 78 SSU, Sp. Gr.: 0.96
Step 1. Correct element ∆P for viscosity.
Element
∆P = 14 psi x 78SSU/140SSU = 7.8 psi
(1.0 bar x 14.6 cSt/30 cSt = 0.5 bar)
Step 2. Correct housing ∆P for specific gravity.
Housing
∆P = 7 psi x 0.96/0.88 = 7.6 psi (0.5 bar x 0.96/0.88 = 0.55 bar)
Step 3. Calculate assembly ∆P.
Assy
∆P = 7.8 psi + 7.6 psi = 15.4 psi (0.5 bar + 0.55 bar = 1.05 bar)
Fluid Conditions: Specific gravity 0.88
Note: Housing ∆P is directly proportional
to specific gravity.
BETA RATING
Beta ratings are the recognized industry
standard for measuring filter efficiency.
They offer the user an accurate method
of comparing different filters’ efficiency.
Beta ratings are obtained from strictly
controlled laboratory tests, to ISO
Specification 4572. The higher the Beta
ratio the greater the filter’s capacity to
capture particles larger than the indicated
Beta size. A Beta rating of Bx ≥ 75 with
a corresponding efficiency of 98.6 % is
normally considered the absolute rating.
R
981-
H
_0
4
0
3
(
2)
R9
8
1
-H
_0
4
1
5
(
10
)
FLOW, LITERS/MIN
0 25 50 75 100
0 5 10 15 20 25 30
25
20
15
10
0
P, PSID
P, BAR
∆
∆
1.5
25
1.5
1.0
0.5
20
15
10
5
0
1.5
1.0
0.5
FLOW U.S. GPM
R981-H_0803 (4
)
R981
-H_
0
815 (18
)
P, PSID
P, BAR
∆
∆
50 100 150
0 10 20 30 40
FLOW, LITERS/MIN
5
150
Parker Hannifin Corporation
Hydraulic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
Dimensions - S Port
Inches (mm)
‘S’ Port Option The pressure line is connected directly to the inlet port of the
ServoSaver. The outlet port of the filter is internally connected to the valve through
our subplate or a specific manifold pad provided by the user.
Dimensions - M Port
Inches (mm)
‘M’ Port Option This unique porting provides internal inlet and outlet porting of the
filter as well as an inlet to the valve without any disruption to the existing plumbing.
Connection to the valve can be accomplished through our sandwich plate or a
specific manifold pad provided by the user.
151
Parker Hannifin Corporation
Hydraualic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
Dimensions - M port Sandwich Plate
Inches (mm)
Dimensions - S port Sandwich Plate
Inches (mm)
Sandwich (Manifold) Plate Mounting:
The ServoSaver filter assembly is mounted to a
manifold that is sandwiched between the
subplate and valve.
Subplate Mounting: The ServoSaver filter assembly
is mounted to a subplate which provides all of the
necessary threaded work ports as well as the
manifolding surface for the valve.
PORT
CODE VALVE INTERFACE CIRCLE DIA. A B C D
1A Vickers SM4-10: Atchley 206 .625 (15.9) 1.38 (35.1) 2.75 (69.9) 1.19 (30.2) 3.19 (81.0)
Moog 770 Type II
2A Atchley 207, 211; .780 (19.8) 1.38 (35.1) 2.75 (69.9) 1.19 (30.2) 3.19 (81.0)
Moog 770 Type III
1D NFPA D01, CETOP-3+NG-6
Diamond Pattern
1.44 (36.6) 2.88 (73.2) .94 (23.9) 2.75 (69.9)
1M Moog 62: Atchley 215A .875 (22.2) 1.50 (38.1) 3.00 (76.2) 1.62 (41.1) 4.38 (111.3)
4M Vickers SM4-40; Parker BD-30 1.750 (44.5) 2.25 (57.2) 4.50 (114.3) 1.68 (42.7) 4.12 (104.6)
1P Pegasus 142A, 162A, 162R .937 (23.8) 1.50 (38.1) 3.00 (76.2) 1.19 (30.2) 3.25 (82.6)
2P Pegasus 122 A .625 (15.9) 1.38 (35.1) 2.75 (69.9) 1.19 (30.2) 3.19 (81.0)
1V Vickers SM4-15, Atchley 218A .937 (23.8) 1.50 (38.1) 3.00 (76.2) 1.19 (30.2) 3.25 (82.6)
CODE VALVE INTERFACE CIRCLE DIA. A B C D E F G H I
1A Vickers SM4-10: Atchley 206: .625 (15.9) 2.00 (50.8) 4.31 (109.4) 2.00 (50.8) 4.00 (101.6) 2.69 (68.3) 3.34 (84.8) 1.75 (44.5) 3.75 (95.3) 10-32
Moog 770 Type II
2A Atchley 207, 211; .780 (19.8) 2.00 (50.8) 4.31 (109.4) 2.00 (50.8) 4.00 (101.6) 2.69 (68.3) 3.34 (84.8) 1.75 (44.5) 3.75 (95.3) 10-32
Moog 770 Type III
1D NFPA D01, CETOP-3+NG-6 Diamond 2.12 (53.8) 4.25 (108) 1.75 (44.4) 3.75 (95.2) 2.50 (63.5) 3.00 (76.2) 1.72 (43.7) 3.00 (76.2) 10-24
1M Moog 62: Atchley 215A .875 (22.2) 2.00 (50.8) 4.00 (101.6) 2.00 (50.8) 4.62 (117.3) 2.56 (65.0) 3.28 (83.3) 1.51 (38.4) 3.52 (89.4) 5/16-18
1P Pegasus 142A, 162A, 162R .937 (23.8) 2.00 (50.8) 4.31 (109.4) 2.00 (50.8) 4.00 (101.6) 2.69 (68.3) 3.28 (83.3) 1.75 (44.5) 3.75 (95.3) 1/4-20
2P Pegasus 122 A .625 (15.9) 2.00 (50.8) 4.31 (109.4) 2.00 (50.8) 4.00 (101.6) 2.69 (68.3) 3.34 (84.8) 1.75 (44.5) 3.75 (95.3) 10-32
1V Vickers SM4-15, Atchley 218A .937 (23.8) 2.00 (50.8) 4.31 (109.4) 2.00 (50.8) 4.00 (1.75) 2.69 (68.3) 3.34 (84.8) 2.31 (58.7) 3.75 (95.3) 1/4-20
FOR DIMENSIONAL INFORMATION ON OTHER SUBPLATES CONTACT PARKER.
FOR DIMENSIONAL INFORMATION ON OTHER SUBPLATES CONTACT PARKER.
152
PORT
Parker Hannifin Corporation
Hydraulic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
153
Parts Breakdown
ServoSaver™ Series
BOWL
LENGTH PART
CODE NUMBER
04 401766
08 401767
HEAD ASSEMBLY
PORT PART
TYPE NUMBER
M 402065
S 402066
VISUAL INDICATOR
INDICATOR PART
CODE NUMBER
V 401810
B 401811
ELECTRICAL INDICATOR
SUB-ASSEMBLY ACTUATOR
INDICATOR PART PART
CODE QTY NUMBER NUMBER QTY
B,E 1 401814 FF3468 1
D
1 401814
FF3468 2
1 401813
INDICATOR PLUG
INDICATOR PART
CODE NUMBER
E, N, V 505918
SEAL KIT
Nitrile 936077
EPR 400913
Fluorocarbon 936078
Vent/Drain O-Ring
N93902 Nitrile
V93902 Fluorocarbon
E83902 EPR
Bowl Back-up Ring
400225
S-Port Bolt Kit
400323
Element
Bowl
Electrical
Actuator
Electric Subassembly
Visual Indicator
Indicator Plug
M-Port
Bolt Kit
400307
Indicator Seal
N93908 Nitrile
V93908 Fluorocarbon
E83908 EPR
Bowl O-Ring
N72035 Nitrile
V72035 Fluorocarbon
E82035 EPR
Element O-Ring
N72119 Nitrile
V72119 Fluorocarbon
E82119 EPR
Head/Plate O-Ring
N72017 Nitrile
V72017 Fluorocarbon
E82017 EPR
Vent/Drain
Plug
Head M-Port
Head S-Port
Vent/Drain Plug
(2 req’d for M-Port)
400065
Parker Hannifin Corporation
Hydraualic Filter Division
Metamora, OH
High Pressure Filters
ServoSaver™ Series
HOW TO ORDER:
Select the desired symbol (in the correct position) to construct a model code.
Example:
M Manifold inlet & outlet
BOX 3: PORT OPTIONS
Symbol Description
A Nitrile
H Fluorocarbon (FKM)
BOX 1: SEALS
Symbol Description
ER Electrical Indicator
VR Visual Indicator
BOX 2: INDICATOR
Symbol Description
04 Single length
08 Double length
BOX 4: ELEMENT LENGTH
Symbol Description
03 3 Micron
15 15 Micron
BOX 5: DEGREE OF FILTRATION
Symbol Description
OMIT Direct mount
W Sandwich Plate
BOX 6: MOUNTING STYLE
Symbol Description
OMIT Direct Mount, No Plate
Required
1D NFPA D03, CETOP-3+NG-6
BOX 7: VALVE INTERFACE PLATE
Symbol Description
154
Please note the bolded options reflect
standard options with a reduced lead-time.
Consult factory on all other lead-time options.
Media Single length Double length
2µ Microglass III 935191 935193
10µ Microglass III 935192 935192
Replacement Elements
STD BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6 BOX 7
HSS981 A VR M 04 03 1D